Tag Archives: swing arm
Omni Swing Arm Flex
As detailed in the Swing Arm Disassembly page, the Omni Swing Arm flexes when you handle the Faceting Head. This flex can be reduced but not eliminated by tightening the Swing Arm mounting nut underneath the Swing Arm. However tightning … Continue reading
Omni Swing Arm and Mast Disassembly
Removing the Swing Arm and Mast from the Omni Faceting Machine is a relatively easy and straight-forward process. Please ensure you have completed the Omni Disassembly First Steps before proceding. Removing the Mast Tip the machine back so you can … Continue reading
Omni Faceting Machine Design Flaws
After starting to disassemble my Omni-E Faceting Machine, I discovered several things which cause me grave concern. This section will discuss the various design flaws and poor craftsmanship that I’ve uncovered on my Omni. In short, there are three significant … Continue reading